Construction

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 85.164.146.92 (talk) at 10:13, 19 May 2007 (→Design team). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Jump to navigation Jump to search
For other uses, see Construction (disambiguation).
In large construction projects, such as skyscrapers, cranes are essential.

In project architecture and civil engineering, construction is the building or assembly of any infrastructure on a site or sites. Although this may be thought of as a single activity, in fact construction is a feat of multitasking. Normally the job is managed by the construction manager, supervised by the project manager, design engineer or project architect. While these people work in offices, every construction project requires a large number of laborers, carpenters, and other skilled tradesmen to complete the physical task of construction.

For the successful execution of a project effective planning is essential. Those involved with the design and execution of the infrastructure in question must consider the environmental impact of the job, the successful scheduling, budgeting, site safety, availability of materials, logistics, inconvenience to the public caused by construction delays, preparing tender documents, etc.

Type of construction project

In general, there are three types of construction: (1) building, (2) heavy/highway, and (3) industrial. Each type of construction requires a unique team to plan, design, construct, and maintain the project.

Building construction

Building construction for several apartment blocks. The blue material is insulation cladding, which will be covered later.
A large unfinished building.

Building construction is the process of adding structure to reach undesirable end results, such as structural collapse, cost overruns, and/or litigations reason, those with experience in the field make detailed plans and maintain careful oversight during the project to ensure a positive outcome.

Residential construction

More and more families are looking into building their own homes, or contracting to have them built. Construction practices, technologies, and resources conform to state and local building codes.

Heavy/Highway construction

Heavy/Highway construction is the process of adding infrastructure to our built environment. Owners of these projects are usually government agencies, either at the national or local level. As in building construction, heavy/highway construction has design, financial, and legal considerations, however these projects are not usually undertaken for-profit, but to service the public interest. However, heavy/highway construction projects are also undertaken by large private corporations, including, among others, the golf courses, harbors, power companies, railroads, and mines, who undertake the construction of access roads, dams, railroads, general site grading, and massive earthwork projects. As in building construction, the owner will assemble a team to create an overall plan to ensure that the goals of the project are met.

Authority having jurisdiction

In construction, the authority having jurisdiction (AHJ) is the governmental agency or subagency which regulates the construction process. In most cases, this is the municipality in which the building is located. However, construction performed for supra-municipal authorities are usually regulated directly by the owning authority, which becomes the AHJ.

During the planning of a building, the zoning and planning boards of the AHJ will review the overall compliance of the proposed building with the municipal General Plan and zoning regulations. Once the proposed building has been approved, detailed civil, architectural, and structural plans must be submitted to the municipal building department (and sometimes the public works department) to determine compliance with the building code and sometimes for fit with existing infrastructure. Often, the municipal fire department will review the plans for compliance with fire-safety ordinances and regulations.

Construction on a building in Kansas City

During the construction of a building, the municipal building inspector inspects the building periodically to ensure that the construction adheres to the approved plans and the local building code. Once construction is complete and a final inspection has been passed, an occupancy permit may be issued.

An operating building must remain in compliance with the fire code. The fire code is enforced by the local fire department.

Any changes made to a building including its use, expansion, its structural integrity, and fire protection items, require acceptance by the AHJ. Anything affecting basic safety functions, no matter how small they may appear, may require the owner to apply for a building permit, to ensure proper review of the contemplated changes against the building code.

Routes into construction careers

There are several routes to the different careers within the construction industry. Craft industries offer jobs where employees train while they work through apprenticeships and other training schemes.

Technical occupations in the UK require GCSE qualifications or vocational equivalents, either initially or through on the job apprenticeship training. One example is that of Quantity Surveying. Quantity Surveyors are effectively cost managers within the construction industry and may be: (1) employed by Chartered Surveyor practices (referred to often as "PQS" derived from the term Private Quantity Surveyor) who normally represent the client's interest and liaise with the Architect on the client's team, preparing cost plans, preparing tender documentation, giving cost advice on variations, preparing monthly valuation payments to the contractor, agreeing the final account with the contractor, generally looking after the client's interests (although the role can be referred to within some standard forms of contract as being a neutral role to value 'the' costs of the project), in practice it tends to be looking after the client's intersts primarily; or (2) employed by Main Contractors, in which role they manage the contractor's costs, place subcontract orders, make payments to subcontractors, claim monthly valuations from the client's surveyor (Private QS or "PQS"), cost manage variations, prepare internal cost reports to senior management and directors, generally managing the project commercially and protect the contractor's interests contractually. Contractual aspects such as delays and extensions of time issues are also within the remit of the Quantity Surveyor (QS); or (3) employed by Subcontractors, in which role they carry out a similar function to Main Contractor's QS's. The main difference is that they are normally submitting monthly valuation claims for payment to the Main Contractor, whereas the Manin Contractor claims from the client's Surveyor (usually a Chartered Surveyor practice or Private QS "PQS"). Large subcontractors may also employ sub-subcontractors, thereby making the QS role similar in the cost management role, including placing sub-contract orders (to sub-subcontractors), valuing and claiming variations, preparing cost reports to senior management, etc; or (4) employed by Local Authorities (local Councils, etc), whereby the role is broadly similar to that of private practice surveyors in cost managing project from the funding client's perspective (in this case the Local Authority council within which they are employed), dealing usually with main contractors; or (5) employed by Developers; whereby the role may be a mixture of the role of a client's surveyor (the funding client being the developer in this case) mixed with that of a main contractor in possibly employing package sub-contractors directly Other information: The most recognised body for surveyors in construction is the Royal Institution of Chartered Surveyors (the 'RICS'). It is more common for a private practice surveyor or local authority employed surveyor to be a member of the RICS, though RICS qualified surveyors do work within main contractors and sub-contractors (the writer of this Quantity Surveyor segment qualified RICS within private practice working on the client's side, then migrated over to work for a large sub-contractor. Such cross-overs are quite common between client's side and contracting). Quantity Surveying offers a great diversity of roles and in career path, wotking on a variety of projects and within different areas and facets of the construction industry. The qualification of "Chartered Quantity Surveyor" has been superseded as the RICS rules have replaced this with simply "Chartered Surveyor" (except those existing Chartered QS's who registered to keep the Chartered QS title by a date now passed), and Chartered Quantity Surveyor practices have now largely adopted the title of "Construction Cost Consultants" and having the right to call themselves simply "Chartered Surveyors" - though still often referred to in the UK construction industry as "PQS's". It is also possible for Construction Cost Consultant practices to be occasionally employed by local authorities, contractors or subcontractors, on a particular construction project although not if they are already employed as surveyors for the same construction project.

As well as the role of Quantity Surveyor, other professions within the UK construction industry are for example: Architect, Engineer, Project Manager, Planner, Safety Officer. These roles may be in 'Building' (buildings such as Offices, Shopping Centres, Housing); or 'Civil Engineering' (structures such as Bridges, Dams, Motorways/Roads/Highways, Harbours/Ferry Terminals). While projects such as construction of new Power Stations or Naval Bases may comprise a combination of both 'building' and 'civil engineering'.

Graduate roles in the construction industry are filled by people with at least a foundation degree in subjects such as civil engineering, building and construction management. Graduates often receive specialised positions and gain qualifications such as chartered status.

Tender requirements

In many countries (such as the United States), public agencies must adhere to many legal requirements that require the project to undergo a public bid process. These laws stem from underlying norms that all constructors should have an equal opportunity to do construction for the public, and not those constructors who can influence monetarily (bribe) public officials for contract award. These laws stipulate very rigid procedures for soliciting, receiving, and awarding to the lowest responsive and responsible bidder.

Industrial construction

Industrial construction, though a relatively small part of the entire construction industry, is a very important component. Owners of these projects are usually large, for-profit, industrial corporations. These corporations can be found in such industries as medicine, petroleum, chemical, power generation, manufacturing, etc. Processes in these industries require highly specialized expertise in planning, design, and construction. As in building and heavy/highway construction, this type of construction requires a team of individuals to ensure a successful project.

Design team

A construction crew

In the modern industrialized world, construction usually involves the translation of paper or computer based designs into reality. A formal design team may be assembled to plan the physical proceedings, and to integrate those proceedings with the other parts. The design usually consists of drawings and specifications, usually prepared by a design team including architects, interior designers, surveyors, civil engineers, cost engineers (or quantity surveyors), mechanical engineers, electrical engineers, and structural engineers.[1] The design team is most commonly employed by (i.e. in contract with) the property owner. Under this system, once the design is completed by the design team, a number of construction companies or construction management companies may then be asked to make a bid for the work, either based directly on the design, or on the basis of drawings and a bill of quantities provided by a quantity surveyor. Following evaluation of bids, the owner will typically award a contract to the lowest responsible bidder.

The modern trend in design is toward integration of previously separated specialties, especially among large firms. In the past, architects, interior designers, engineers, developers, construction managers, and general contractors were more likely to be entirely separate companies, even in the larger firms. Presently, a firm that is nominally an "architecture" or "construction management" firm may have experts from all related fields as employees, or to have an associated company that provides each necessary skill. Thus, each such firm may offer itself as "one-stop shopping" for a construction project, from beginning to end. This is designated as a "design Build" contract where the contractor is given a performance specification, and must undertake the project from design to construction, while adhering to the performance specifications.

Construction of a pre-fab house

Several project structures can assist the owner in this integration, including design-build, partnering, and construction management. In general, each of these project structures allows the owner to integrate the services of architects, interior designers, engineers, and constructors throughout design and construction. In response, many companies are growing beyond traditional offerings of design or construction services alone, and are placing more emphasis on establishing relationships with other necessary participants through the design-build process.

The increasing complexity of construction projects creates the need for design professionals trained in all phases of the project's life-cycle and develop an appreciation of the building as an advanced technological system requiring close integration of many sub-systems and their individual components, including sustainability. Building engineering is an emerging discipline that attempts to meet this new challenge.

A construction worker with column reinforcement steel.

Financial advisors

Many construction projects suffer from preventable financial problems. Underbids ask for too little money to complete the project. Cash flow problems exist when the present amount of funding cannot cover the current costs for labor and materials, and because they are a matter of having sufficient funds at a specific time, can arise even when the overall total is enough. Fraud is a problem in many fields, but is notoriously prevalent in the construction field. Financial planning for the project is intended to ensure that a solid plan, with adequate safeguards and contingency plans, is in place before the project is started, and is required to ensure that the plan is properly executed over the life of the project.

Mortgage bankers, accountants, and cost engineers are likely participants in creating an overall plan for the financial management of the building construction project. The presence of the mortgage banker is highly likely even in relatively small projects, since the owner's equity in the property is the most obvious source of funding for a building project. Accountants act to study the expected monetary flow over the life of the project, and to monitor the payouts throughout the process. Cost engineers apply expertise to relate the work and materials involved to a proper valuation.

Large projects can involve highly complex financial plans. As portions of a project are completed, they may be sold, supplanting one lender or owner for another, while the logistical requirements of having the right trades and materials available for each stage of the building construction project carries forward.

The construction of Federation Tower in Moscow, Russia, the tallest building in Europe

A construction project must fit into the legal framework governing the property. These include governmental regulations on the use of property, and obligations that are created in the process of construction.

The project must adhere to zoning and building code requirements. Constructing a project that fails to adhere to codes will not benefit the owner. Some legal requirements come from malum in se considerations, or the desire to prevent things that are indisputably bad - bridge collapses or explosions. Other legal requirements come from malum prohibitum considerations, or things that are a matter of custom or expectation, such as isolating businesses to a business district and residences to a residential district. An attorney may seek changes or exemptions in the law governing the land where the building will be built, either by arguing that a rule is inapplicable (the bridge design won't collapse), or that the custom is no longer needed (acceptance of live-work spaces has grown in the community).

A construction project is a complex net of contracts and other legal obligations, each of which must be carefully considered. A contract is the exchange of a set of obligations between two or more parties, but it is not so simple a matter as trying to get the other side to agree to as much as possible in exchange for as little as possible. The time element in construction means that a delay costs money, and in cases of bottlenecks, the delay can be extremely expensive. Thus, the contracts must be designed to ensure that each side is capable of performing the obligations set out. Contracts that set out clear expectations and clear paths to accomplishing those expectations are far more likely to result in the project flowing smoothly, whereas poorly drafted contracts lead to confusion and collapse.

Legal advisors in the beginning of a construction project seek to identify ambiguities and other potential sources of trouble in the contract structure, and to present options for preventing problems. Throughout the process of the project, they work to avoid and resolve conflicts that arise. In each case, the lawyer facilitates an exchange of obligations that matches the reality of the project.

Interaction of expertise

Design, finance, and legal aspects overlap and interrelate. The design must be not only structurally sound and appropriate for the use and location, but must also be financially possible to build, and legal to use. The financial structure must accommodate the need for building the design provided, and must pay amounts that are legally owed. The legal structure must integrate the design into the surrounding legal framework, and enforces the financial consequences of the construction process.

Construction trades

Main article: List of construction trades
The churches of Kizhi, Russia are among a handful of World Heritage Sites built entirely of wood, without metal joints.

Construction materials

Construction software

Construction software is a broad range of computer software applications designed for businesses in the construction, real estate development, civil engineering, and architecture industries. Applications function in the operations and management of construction projects, with modules in project management, materials and cost estimating, service and human resource management, and accounting. Construction software is developed as single-module specialty applications, or as a software suite, capable of performing tasks across several modules.

Construction software modules

Project management

Construction project management software manages various components of complex projects, including scheduling, communication, and resource allocation. Due to the complexity of construction projects and the large number of internal employees and subcontractors involved, construction project management software typically focuses on the contributions of individuals to the project's progress. Applications include the ability to assign components of a project to an individual or company, as well as the specifications and time frame necessary for completion. In addition, applications typically allow users to track the use of resources and to document changes in a project's costs, materials, or personnel.

To facilitate collaboration among several individuals or companies, construction project management software is often delivered as software as a service. This model allows for contributors to communicate and to manage the progress of the project over the world wide web via a hosted server.

Estimating

Construction estimating software aids the user in providing estimates of the costs, materials, and quantities necessary for construction projects. Applications typically require user input of a large number of parameters, such as building dimensions, materials specifications, and budgets, and then automate the process by which estimates are produced. Full reports of a project's total cost, cost per input, and cost for changes are generated to streamline the difficult and complex process of associating different materials and quantities with final project costs.

Estimating applications are often delivered with digitizers that incorporate various sensors to determine electronic blueprints. Users can implement digitizers to scan the architectural plans and output automated estimates of the materials and quantities necessary for construction. Minimal user input is required and the time required to generate estimates can be reduced when using digitizers.

Accounting

Construction accounting software provides specialized abilities to process financial transactions made by construction firms. Applications automate the processes of company payroll, accounts payable, and accounts receivable, with specialized functionality to handle the large amounts of third-party contractors associated with company finances. Applications allow users to track financial transactions and parameters of individual projects or components of a project, and are typically integrated into the purchase orders and agreements made by construction firms. Reporting of overhead, labor costs, project and change order costs, revenues, and margins is typically included in construction accounting applications.

Human resource management

Applications designed to facilitate the management of human resources for construction firms focus on two groups of individuals: internal employees and third-party contractors. This module typically provides the ability to document the tasks, performance, attendance, time employed, and benefits provided to internal employees. The tasks of external contractors can be managed as well, with the additional ability to document their past projects, agreements, and correspondence.

Service management

Construction software also provides benefits in the management and administration of service-related functions and resources. Call management, customer service tracking and reporting, and dispatch control are generally integrated by the application into a dashboard to facilitate tracking a project across multiple management criteria. The allocation and use of equipment, tools, and other materials can also be tracked and managed using service management applications.

Structural elements

See also

At Wikiversity, you can learn more and teach others about Construction at the School of Construction.

Template:Technology-footer

  1. ^ Holm, Ivar (2006). Ideas and Beliefs in Architecture and Industrial design: How attitudes, orientations, and underlying assumptions shape the built environment. Oslo School of Architecture and Design. ISBN 8254701741.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Construction&oldid=131975683"